Do you have a question about the Toshiba RAS-13NKHD-E and is the answer not in the manual?
Type | Split System |
---|---|
Cooling Capacity | 3.5 kW |
Heating Capacity | 4.0 kW |
Refrigerant | R410A |
Power Supply | 220-240V, 50Hz |
Energy Efficiency Ratio (EER) | 3.21 |
Coefficient of Performance (COP) | 3.61 |
Indoor Unit Dimensions (W x H x D) | 798 x 293 x 230 mm |
Outdoor Unit Dimensions (W x H x D) | 780 x 550 x 290 mm |
Indoor Unit Weight | 9 kg |
Noise Level (Outdoor Unit) | 50 dB(A) |
Detailed construction view and dimensions of the indoor unit.
Construction view and installation dimensions for specific outdoor unit models.
Construction view and installation dimensions for specific outdoor unit models.
Wiring diagram for the RAS-13NKHD-E / RAS-13UAH-E3 model.
Wiring diagram for RAS-10NKHD-E/RAS-10UAH-E3 and RAS-07NKHD-E/RAS-07UAH-E3.
Wiring diagram for the RAS-13NKD-E / RAS-13UA-E3 model.
Wiring diagram for RAS-10NKD-E/RAS-10UA-E3 and RAS-07NKD-E/RAS-07UA-E3.
Detailed specifications for electrical parts of indoor units.
Specifications for electrical parts of the outdoor unit model RAS-13UAH-E3.
Specifications for electrical parts of the outdoor unit model RAS-10UAH-E3.
Specifications for electrical parts of the outdoor unit model RAS-07UAH-E3.
Detailed specifications for electrical parts of indoor units.
Specifications for electrical parts of the outdoor unit model RAS-13UA-E3.
Specifications for electrical parts of the outdoor unit model RAS-10UA-E3.
Specifications for electrical parts of the outdoor unit model RAS-07UA-E3.
Refrigeration cycle diagram for specific model.
Refrigeration cycle diagram for specific model.
Refrigeration cycle diagram for specific model.
Refrigeration cycle diagram for specific model.
Refrigeration cycle diagram for specific model.
Refrigeration cycle diagram for specific model.
Control block diagram for the heat pump model.
Control block diagram for the cooling model.
General overview of the air conditioner's control system and components.
Explanation of the operation circuit and its functions.
Details on the Hi POWER operating mode.
Control logic for high-temperature limits in NKHD series.
Control logic to prevent freezing of the indoor heat exchanger.
Operation procedures for defrosting the outdoor unit.
Control logic to prevent excessive current draw.
How to set and use the auto restart function.
Information on the filter check lamp and reset procedure.
Description and operation of the self-cleaning function.
Important safety precautions for installation.
Diagrams illustrating the installation process for units.
General guidelines and optional parts for installation.
Detailed procedures for installing the indoor unit.
Guidelines for selecting the installation place for the outdoor unit.
Procedure to set the remote control selector switch.
Miscellaneous installation procedures including gas leak test.
General procedure for troubleshooting issues.
Initial checks for common operational problems.
Initial diagnosis based on unit lamps and symptoms.
Using remote control for self-diagnosis and check codes.
Flowcharts to diagnose and resolve specific operational issues.
Troubleshooting steps for remote control and indoor PC board issues.
Troubleshooting steps for air purifier and minus ion functions.
Procedures for replacing parts of the indoor unit.
Procedures for replacing parts of the outdoor unit.
Exploded view and parts list for the indoor unit E-Parts Assembly.
Exploded view and parts list for the indoor unit.
Exploded view and parts list for the outdoor unit RAS-13UAH-E3.
Exploded view and parts list for the outdoor unit RAS-10UAH-E3.
Exploded view and parts list for the outdoor unit RAS-07UAH-E3.
Exploded view and parts list for the outdoor unit RAS-13UA-E3.
Exploded view and parts list for the outdoor unit RAS-10UA-E3.
Exploded view and parts list for the outdoor unit RAS-07UA-E3.