Indoor unit
Turn on the main power supply
•
Awaitingperiodof3minutesisrequiredafterthepoweristurnedon.Duringthisperiod,theoperationlampwillilluminate.However,thecompressor
will not start.
Check transmitting and receiving
Notes
•
Use the remote control where the indoor unit can receive the signal. It does not work if the signal is obstructed by curtains or sliding doors.
•
The distance for transmitting and receiving is shorter if a bright light, such as sunlight, affects of the main unit.
•
Thedistancefortransmissionandreceivingisshorteriftheremotecontrolisoperatedatanobliqueangletothemainunit.
Point the remote control at the remote control receiving module on the indoor unit.
•
The correct signal is confirmed by the receiving tone and the operation lamp will illuminate.
•
When button is pressed, the receiving tone will sound and the operation will stop.
The receiving and
transmitting distance.
Approx. 7m from straight in
front of the indoor unit.
•
Check that the signal is transmitted and received at the installed position if the remote control is fixed to the remote control holder.
10
To Next Page
Loading...