EasyManua.ls Logo

Toshiba RAS-18BKS-HK User Manual

Toshiba RAS-18BKS-HK
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AIR CONDITIONER (SPLIT TYPE)
INSTALLATION MANUAL
Indoor unit
RAS-18BKS-HK
Outdoor unit
RAS-18BAS-HK
1115551255
ENGLISH
01_1115551255-EN.indd 101_1115551255-EN.indd 1 9/7/2558 BE 5:06 PM9/7/2558 BE 5:06 PM
Question and Answer IconNeed help?

Do you have a question about the Toshiba RAS-18BKS-HK and is the answer not in the manual?

Toshiba RAS-18BKS-HK Specifications

General IconGeneral
BrandToshiba
ModelRAS-18BKS-HK
CategoryAir Conditioner
LanguageEnglish

Summary

PRECAUTIONS FOR SAFETY

INSTALLATION DIAGRAM

Overview and Placement

Visual guide for indoor and outdoor unit placement and connections.

Optional Installation Parts

Details on additional parts for specific installation needs.

INDOOR UNIT INSTALLATION

Installation Location

Guidelines for selecting an appropriate mounting place for the indoor unit.

Remote Control Placement

Recommendations for positioning the remote control for optimal signal reception.

Mounting Plate and Wiring

Instructions for cutting holes, mounting the plate, and connecting wiring.

INDOOR UNIT WIRING DETAILS

Connecting Indoor Unit Wires

Detailed steps for connecting control wires to the indoor unit's display board.

Wired Remote Control Setup

Procedures for connecting and setting up the remote controller for wired operation.

PIPING AND DRAINAGE INSTALLATION

Refrigerant Pipe and Drain Hose Setup

Procedures for shaping, insulating, and connecting pipes and drain hoses.

Drain Hose Management

Steps for removing, fixing, and ensuring proper drainage of the drain hose.

Pipe Bending and Connection

Guidance on bending refrigerant pipes and connecting them to the unit.

UNIT FIXING AND DRAINAGE

Indoor Unit Fixing

Methods for securely attaching the indoor unit to the installation plate.

Drainage System Setup

Instructions for proper installation of the drainage system to prevent issues.

OUTDOOR UNIT INSTALLATION

Outdoor Unit Location

Criteria for selecting a suitable site for the outdoor unit installation.

REFRIGERANT SYSTEM PROCEDURES

Refrigerant Piping Connection

Steps for flaring and tightening refrigerant pipe connections to the unit.

Vacuum Pump Operation

Procedure for evacuating air from refrigerant lines using a vacuum pump.

Evacuating and Air Purge

Detailed steps for removing air and moisture from the refrigeration circuit.

ELECTRICAL AND OPERATIONAL PROCEDURES

Electrical Work

Guidelines for connecting the power supply and internal wiring.

Gas Leak Test

Method for checking refrigerant connections for leaks.

Test Operation

Procedure to perform a test run of the air conditioner.

Remote Control A-B Selection

How to set up remote control for multiple indoor units in the same room.

Auto Restart Setting

Configuration for the auto restart function after a power failure.

Related product manuals