Toshiba RAS-18SK Series - Preparation and Basic Operations; Filter and Battery Preparation; Clock and Remote Control Setup; Airflow Direction Control

DRY OPERATION
1
Press
FIX
:Movethelouverinthe
desiredverticaldirection.
2
Press
SWING
:Swingtheair
automaticallyandpressagaintostop.
3
Forhorizontaldirection,adjustmanually.
PRECAUTIONS FOR SAFETY
AIR FLOW DIRECTION
3
Note:

• Donotmovethelouvermanuallybyothers.

• Thelouvermayautomationpositioningbysomeoperationmode.
ONE-TOUCH
5
Pressthe“ONE-TOUCH”buttonforfullyautomatedoperationthatiscustomized
tothetypicalconsumerpreferencesinyourregionoftheworld.Thecustomized
settingscontroltemperatureairowstrength,airowdirectionandothersettings
toprovideyoualternatecontactwith“ONE-TOUCH”ofthebutton.Ifyouprefer
other settings you can select from the many other operating functions of your
Toshibaunit.
 Press
ONE-TOUCH
:Starttheoperation.
AUTOMATIC OPERATION
6
Toautomaticallyselectcooling,heating,orfanonlyoperation
1.Press
MODE
:SelectA.
2.Press
TEMP
:Setthedesiredtemperature.
1.Press
MODE
:SelectCool ,Heat ,orFanonly .
2.Press
TEMP
:Setthedesiredtemperature.
 Cooling:Min.17
o
C,Heating:Max.30
o
C,FanOnly:Notemperatureindication
3.Press
FAN
:SelectAUTO,LOW ,LOW+ ,MED ,MED+ ,or
 HIGH
.
8
Fordehumidication,amoderatecoolingperformanceiscontrolledautomatically.
 1.Press
MODE
:SelectDry .
 2.Press
TEMP
:Setthedesiredtemperature.
Hi-POWER OPERATION
AIR PURIFYING OPERATION
10
9
To automatically control room temperature and airow for faster cooling or
heatingoperation(exceptinDRYandFANONLYmode)
 Press
Hi-POWER
:Startandstoptheoperation.
Press
PURE
tostartandstopplasmaairpurierandairionizeroperation.
Theplasmaairpurierandairionizercanbeactivatedordeactivatedbypressing
thePUREbutton.Theairionizerstartsinconjunctionwithplasmaairpurier
operation.
Note: TheFILTERindicator(orange)turnsonafterPUREoperationisperformed
  forabout1000hours.
ECO OPERATION
11
Toautomaticallycontrolroomtosaveenergy(exceptinDRYandFANONLYmode)
Press
ECO
:Startandstoptheoperation.
Note:Coolingoperation;thesettemperaturewillincreaseautomatically1degree/
  hourfor2hours(maximum2degreesincrease).Forheatingoperationthe
  settemperaturewilldecrease.
REMOTE CONTROL
4
PREPARATION BEFORE USE
2
COOLING / HEATING / FAN ONLY OPERATION
7
Preparing Filters
 1.Opentheairinletgrilleandremovetheairlters.
 2.Attachthelters.(seedetailintheaccessorysheet).
Loading Batteries
 1.Removethebatterycover.
 2.Insert2newbatteries(AAAtype)
  followingthe(+)and(–)positions.
Clock Setup
 1.PushCLOCK
●
bytipofthepencil.
  Iftimerindicationisashing,gotothenextstep2.
 2.Press
ON
or
OFF
:adjustthetime.
 3.Press
SET
:Setthetime.
Remote Control Reset
 1.Removethebatteries.
 2.Press
.
 3.Insertthebatteries.
AC
L
TEMPORARY OPERATION
12
Incaseofthemisplacedordischargedremotecontrol

• PressingtheRESETbutton,theunitcanstartor
stopwithoutusingtheremotecontrol.

• OperationmodeissetonAUTOMATICoperation,
presettemperatureis24°Candfanoperationis
automaticspeed.
TIMER OPERATION
13
Daily timer allows the user to set both the ON & OFF timers and will be
activated on a daily basis.
Setting Everyday Timer
Setting the ON Timer Setting the OFF Timer
1
2
Press
SET
:Setthetimer.
Press
SET
:Setthetimer.
3
Press
CLR
:Cancelthetimer.
Press
CLR
:Cancelthetimer.

• Duringtheeverydaytimerisactivating,botharrows( , )areindicated.
Note:
• Keeptheremotecontrolinaccessibletransmissiontotheindoorunit;
otherwise,thetimelagofupto15minuteswilloccur.

• Thesettingwillbesavedforthenextsameoperation.
1 3
Press
SET
.
2 4
Setthetimerwhentheairconditionerisoperating.
1Infraredsignalemitter
2Start/Stopbutton
3Modeselectbutton(MODE)
4Temperaturebutton(TEMP)
5Fanspeedbutton(FAN)
6Swinglouverbutton(SWING)
7Setlouverbutton(FIX)
8Ontimerbutton(ON)
9Offtimerbutton(OFF)
!Sleeptimerbutton(SLEEP)
"Setupbutton(SET)
#Clearbutton(CLR)
$ MemoryandPresetbutton(PRESET)
%One-Touchbutton(ONE-TOUCH)
&Highpowerbutton(Hi-POWER)
(Economybutton(ECO)
)Quietbutton(QUIET)
~Comfortsleepbutton(COMFORTSLEEP)
+PlasmaAirPurierbutton(PURE)
,Filterresetbutton(FILTER)
-ClockResetbutton(CLOCK)
.Checkbutton(CHK)
Press
ON
:SettheONtimer.
Press
OFF
:SettheOFFtimer.
Press

ON

:Setthedesired
   ONtimer.
Press

OFF
:Setthedesired
   OFFtimer.
Press
SET
buttonduringthe
(
or )markashing.