– 5 –
FILE NO. SVM-03010(1)
Note : 1
• Capacity is based on the following temperature conditions.
Note : 2
• Charge refrigerant according to the table below.
RAS-24UKHP-E-1 / RAS-24UAH-E-1 RAS-18UKHP-E2 / RAS-18UAH-E2
RAS-24UKP-E-1 / RAS-24UA-E-1 RAS-18UKP-E2 / RAS-18UA-E2
Refrigerant RAS-24UKPX-1 / RAS-24UAX-1 RAS-18UKPX2 / RAS-18UAX2
RAS-24UKP-AR-1 / RAS-24UA-AR-1 RAS-18UKP-AR2 / RAS-18UA-AR2
RAS-24UKPX-T-1 / RAS-24UAX-T-1 RAS-18UKPX-T2 / RAS-18UAX2-T2
*1 No need to charge
15 m or less 15 m or less
extra refrigerant
*2 Need to charge
Over 15 m up to 25 m (20 g/m) Over 15 m up to 20 m (20 g/m)
extra refrigerant
Temperature
Condition
JIS C9612-1994
Cooling Heating
Indoor unit inlet air temperature
(DB) 27°C 20°C
(WB) 19°C 12°C
Outdoor unit inlet air temperature
(DB) 35°C 7°C
(WB) 24°C 6°C
To Next Page
Loading...
