Toshiba RAS-B10 User Manual

INDOOR UNIT DISPLAY
1
AIR FLOW DIRECTION
3
AUTOMATIC OPERATION
6
To automatically select cooling, heating, or fan only operation
1. Press
MODE
: Select Auto A.
2. Press
: Set the desired temperature. Min. 17°C, Max. 30°C.
3. Press
FAN
: Select AUTO, LOW , LOW+ , MED ,
MED+
, HIGH or Quiet
1. Press
MODE
: Select Cool , or Fan only .
2. Press
: Set the desired temperature. Min. 17°C, Max. 30°C.
Fan Only: No temperature indication
3. Press
FAN
: Select AUTO, LOW , LOW+ , MED ,
MED+
, HIGH or Quiet
DRY OPERATION
8
For dehumidication, a moderate cooling performance is controlled
automatically.
1. Press
MODE
: Select Dry .
2. Press
: Set the desired temperature. Min. 17°C, Max. 30°C.
Note: DRY mode fan speed is set to Auto only.
HEATING and 8°C OPERATION
7
1. Press
MODE
: Select Heat .
2. Press
: Set the desired temperature. Min = 5°C, Max = 30°C.
* Temperature range 5-16°C is Heat mode with 8°C operation with less of
energy usage
3. Press
FAN
: Select AUTO, LOW , LOW+ , MED ,
MED+
, HIGH or Quiet
Note: During 8 °C mode active (temperature range 5-16°C), some operation
such as QUIET, HI-POWER, TIMER OFF cannot use.
1
Press
FIX
: Move the
louver in the desired vertical
direction.
2
Press
FIX
: Move the
louver in the desired horizontal
direction.
3
V
V
H
H
H.DA
Swing off
Vertical
(Up-Down)
Swing
Vertical and
Horizontal
Swing
Horizontal
(Left-Right)
Swing
HADA CARE
FLOW
SWING operation can be
selected from MENU button
MENU
●
Vertical (Up-Down) swing
●
Horizontal (Left-Right) swing
●
HADA Care ow
Note:
●
Do not move the louver manually by hands or others.
●
The louver may automation positioning by some operation mode.
● Display brightness can be adjusted, follow procedure on ".
1
ECO (White)
2
Wi-Fi access (White)
3
PURE (White)
4
Timer (White)
5
Operation Mode
- Cool (Blue)
- Heat (Orange)
Preparing Filters
1. Open the air inlet grille and remove the air lters.
2. Attach the lters. (see detail in the Installation Manual).
Loading Batteries (when use wireless operation.)
1. Remove the slide cover.
2. Insert 2 new batteries (AAA type)
following the (+) and (–) positions.
Remote Control Reset
1. Remove the batteries.
2. Press
.
3. Insert the batteries.
PREPARATION BEFORE USE
2
REMOTE CONTROL
4
1
Infrared signal emitter
2
Start/Stop button
3
Mode select button
4
Temperature button
5
Fan speed button
6
Menu select button
7
Set louver Up-Down button
8
Set louver Left-Right button
9
Check button*
*Check button under battery cover
FIX
MODE
FAN MENU
FIX
2
1
4
6
8
3
5
7
9
COOLING / FAN ONLY / OPERATION
5

Toshiba RAS-B10 Specifications

General

Brand	Toshiba
Model	RAS-B10
Category	Air Conditioner
Language	English