11-8-3. Indoor Unit (Other Parts)
11-8-4. Outdoor Unit
No.
1
Part name
Room temp. (TA) sensor
Heat exchanger (TC, TCJ)
sensor
Checking procedure
Disconnect the connector and measure the resistance value with tester.
(Normal temp.)
Temperature
Sensor
TA, TC, TCJ (kΩ)
10°C20°C25°C30°C40°C
20.7 12.6 10.0 7.9 4.5
5
4
3
2
1
White
Yellow
Yellow
Yellow
Yellow
5
4
3
2
1
Refer to 11-5-1. (5).
Measure the resistance value of each winding coil by using the tester.
(Under normal temp. 25°C)
Position
1 to 2
1 to 3
1 to 4
1 to 5
Resistance value
200Ω ± 7%
Refer to 11-5-1. (3) and (4).
2
3
Remote controller
Louver motor
24BYJ48-ST
4 Indoor fan motor
1
KSK75D43UEZA KSK89D53UFZ
Red - White
White - Black
Black - Red
at 20°C
Compressor
RAS-07,10J2AVSG-E
Model : KSK75D43UEZA
RAS-13J2AVSG-E
Model : KSK89D53UFZ
RAS-16J2AVSG-E
Model : KSN108D22UFZ
2 Fan motor
Resistance value
WD
F-340-A43-1
Red - White
White - Black
Black - Red
3 4-Way valve coil
at 20°C
4 Pulse Modulating Valve (PMV) coil
Model : PQ-M10012-000313
5 Outside air temp. sensor (TO)
Discharge temp. sensor (TD)
Suction temp. sensor (TS)
Exchanger temp. sensor (TE)
2.35Ω
33.7 ± 1.7Ω
Resistance value
Position
2.18Ω
Position
White
Red
Black
Measure the resistance value of each winding by using the tester.
Red
White Blac
k
Measure the resistance value of winding by using the tester.
Measure the resistance value of winding by using the tester.
at 20°C
Measure the resistance value of winding by using the tester.
Disconnect the connector, and measure resistance value with the tester.
(Normal temperature)
TD (kΩ )
Temperature
10°C 20°C 30°C 40°C 50°C
Sensor
105 64 41 27 18
TO, TS, TE (kΩ )
20.7 12.6 7.9 4.5
3.4
at 25°C
at 20°C
RAS-07,10,16
RAS-13
Model :
SQ-A2522G-000352
Model :
DXQ-939
Resistance value :
2210 ± 221Ω
Resistance value :
1450 ± 150Ω
COM
COM
2
6
4
Y
W
GR
BL
1
5
R
3
O
Position
Red - White
Red - Orange
Gray- Yellow
Gray- Blue
Resistance value
42 to 50Ω
42 to 50Ω
42 to 50Ω
42 to 50Ω
Under 20°C
KSN108D22UFZ
1.57Ω
To Next Page
Loading...
