Need help?Do you have a question about the Toshiba RAS-B10J2KVSG-E and is the answer not in the manual?
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| SEER | 6.1 |
| SCOP | 4.0 |
| Refrigerant | R32 |
| Indoor Unit Dimensions (W x H x D) | 798 x 293 x 230 mm |
| Outdoor Unit Dimensions (W x H x D) | 660 x 530 x 240 mm |
| Weight (Indoor Unit) | 9 kg |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Noise Level (Min) | 22 dB(A) |
| Type | Split |
| Energy Efficiency Class | A++ |
Critical safety instructions regarding high voltage, installation, and potential hazards.
Important safety advice for operating the unit, including user responsibilities and supervision.
Specific cautions for cleaning, usage, maintenance, and potential damage or injury.
Instructions for opening the grille, removing, and attaching air filters.
Guidance on inserting AAA batteries into the remote control.
Steps to set the current time using the remote control's CLOCK button.
Procedure to reset the remote control by removing and reinserting batteries.
Explanation of icons and indicators on the indoor unit display.
How to adjust vertical louvers and swing for airflow control.
Identification and function of buttons on the remote control.
Steps to select operation mode, temperature, and fan speed.
How to set the unit to automatically select mode, temperature, and fan speed.
Instructions for dehumidification mode with moderate cooling.
Enabling faster cooling or heating by automatically controlling room temperature.
Activating energy-saving mode to adjust temperature automatically.
Using fan circulation for heat distribution or maintaining low room temperature.
Automatic airflow and temperature control for comfortable sleep.
Airflow directed upward to the ceiling for homogeneous room temperature.
Limiting power consumption or reducing outdoor unit sound.
Setting ON or OFF timers for the air conditioner.
Memorizing and recalling preferred operation settings.
Adjusting or turning off the brightness of the remote control display.
Automatic restart of the unit after a power failure.
Reducing indoor unit moisture to prevent bad smells after cooling/dry operation.
Starting or stopping the unit using the reset button without the remote.
Setting up remote controls for multiple indoor units.
Information on protection features, warm air control, and operating conditions.
Common issues like unit not operating or low cooling/heating.
Cleaning instructions for the indoor unit and remote control.
Steps for cleaning the air filters every two weeks.
Detailed steps for programming daily ON/OFF times and operations.
Instructions for deleting individual or all weekly timer programs.
Modifying existing weekly timer settings.
How to turn off the weekly timer function while retaining programs.
To Next Page
