Toshiba RAS-B10J2KVSG-E - To Delete Programs; Edit Weekly Timer Program; Deactivating Weekly Timer Operation

9. Adding or editing the program.
The program can be set to perform on all the required
days until is pressed to conrm the setting.
10. If adding or editing a program is required, please
repeat steps 2 - 8 before setting conrmation.
11. After adding or editing, press
to conrm the
setting*.
Operating Mode
Weekly timer running
Next program
Timer ON or OFF
Next operation
time
Operating Temperature
and Fan speed
Display after
pressing SET
button
*Point remote control at air conditioner receiving module
then, press SET button until you hear the “PiPi” sound.
This means the setting operation has been completed.
As the air conditioner is receiving the signal, you will hear
separate “Pi” sounds corresponding to the number of
days in the selected setting.
An incomplete setting is indicated if the TIMER lamp is
blinking. Press
twice.
Notes :
1. Place the remote control where the indoor unit can receive the signal. This will
increase the accuracy of the timing between the remote control and the air
conditioning unit.
2. The ON/OFF timer can be set during the WEEKLY TIMER operation. In this
situation, the air conditioner will rst follow the normal timer until it is complete;
then, it will return to the WEEKLY TIMER function.
3. During WEEKLY TIMER operation, all of operation such as MODE, TEMP,
FAN, Hi-POWER, ECO and etc., can be adjusted but when the clock reaches
the program setting, the operation will return to the set items in the program.
4. When the remote control is sending a signal to the air conditioner, avoid
interference from objects that can block the signal.
Edit Weekly timer program
To edit the program after conrming the weekly timer
setting, follow steps 1 - 3 below.
1. Press
.
● The day of the week and the program number of the
current day will be displayed.
2. Press
to select the day of the week and
press
to select program number to be
conrmed.
● Resetting the operation.
3. Press
to exit conrming mode.
Deactivating WEEKLY TIMER operation
Press
while “WEEKLY” is displayed on the LCD.
● The “WEEKLY” indicator will disappear from the
LCD. However, the program will remain in the remote
control.
● The TIMER lamp goes off.
● To reactivate the WEEKLY TIMER operation again,
press again, LCD shows the next program.
The program, after reactivation, is related to the clock time.
To delete programs
The individual program
1. Press
.
● The day of the week and the program number is
displayed.
● Select the day to delete the program.
2. Press to select the program number to be
deleted.
3. Press
.
● ON or OFF timer will be cleared and the LCD will
blink.
4. Press to delete the program.
● Press while the LCD is blinking.
The program has now been deleted.
All programs
1. Press
.
● The day of the week and the program number will
be displayed.
2. Press and hold for 3 seconds.
● All programs will be deleted and LCD displays
current operation.
Notes :
Make sure the remote control receiving module on the air
conditioner receives the signal from the remote control.