– 81 –
No.
1
11-9-3. Indoor Unit (Other Parts)
Part name
Room temp. (TA) sensor
Heat exchanger (TC) sensor
Checking procedure
Disconnect the connector and measure the resistance value with tester.
(Normal temp.)
Refer to 11-5-1. (5).
Measure the resistance value of each winding coil by using the tester.
(Under normal temp. 25°C)
Remote controller
Louver motor
MP24GA
2
3
Refer to 11-5-1. (3) and (4).Indoor fan motor4
5
4
3
2
1
White
Yellow
Yellow
Yellow
Yellow
5
4
3
2
1
No.
1
Red
White Black
Red
White Black
11-9-4. Outdoor Unit
Part name
Compressor
(Model : DA111A1F-20F1)
Checking procedure
Measure the resistance value of each winding by using the tester.
Measure the resistance value of winding by using the tester.Outdoor fan motor
(Model : ICF-140-43-4)
2
Outdoor temperature sensor
(TO), discharge temperature
sensor (TD), suction
temperature sensor (TS),
outdoor heat exchanger
temperature sensor (TE)
3
COM
COM
254
Y
W
BR
BL
1
R
6
O
3
Measure the resistance value of winding by using the tester.
Measure the resistance value of winding by using the tester.
4-way valve coil
(Model : VHV)
Electronic control valve coil
(Model : CAM-MD12TF-1)
4
5
Position
Red - White
White - Orange
Brown- Yellow
Brown- Blue
Resistance value
1435±144 Ω
Under 20°C
Position
Red - White
White - Black
Black- Red
Resistance value
17 to 25kΩ
17 to 25kΩ
17 to 25kΩ
Resistance value
42 to 50kΩ
42 to 50kΩ
42 to 50kΩ
42 to 50kΩ
Position
Red - White
White - Black
Black - Red
Disconnect the connector, and measure resistance value with the
tester. (Normal temperature)
Under 20°C
0.88 to 0.98 Ω
Resistance value
380 ± 40 Ω
Resistance value
Position
1 to 2
1 to 3
1 to 4
1 to 5
Temperature
Sensor
TA, TC (kΩ)
10°C 20°C 25°C 30°C 40°C
20.7 12.6 10.0 7.9 4.5
10°C 20°C 25°C 30°C 40°C 50°C
100 64 50 41 27 18
20.7 12.6 10.0 7.9 4.5 –
Temperature
Sensor
TD (kΩ)
TO,TS,TE (kΩ)
Under 20°C
To Next Page
Loading...
