– 98 –
No. RemarksProceduresPart name
1. Side cabinet (right)
1) Perform step 1 in ! and all the steps in ".
2) Remove the fixing screw (ST1TØ4 x 8
ll
ll
l 5 pcs.)
used for securing the side cabinet to the bottom
plate and valve fixing panel.
2. Side cabinet (left)
1) Perform step 1 in !.
2) Remove the fixing screw (ST1TØ4 x 8
ll
ll
l 1 pcs.)
used to secure the side cabinet (left) onto the
heat exchanger.
3) Remove the fixing screw (ST1TØ4 x 8
ll
ll
l 2 pc.)
used for securing the side cabinet to the bottom
plate and heat exchanger.
#
Side cabinet
A
B
C
The back body section is hooked
onto the bottom plate here.
Hook the claw onto
the bottom plate here.
Detail A Detail B Detail C
To Next Page
Loading...
