Need help?Do you have a question about the Toshiba RAS-M07N3KV2-E1 and is the answer not in the manual?
General| Type | Split |
|---|---|
| Cooling Capacity | 2.0 kW |
| Heating Capacity | 2.5 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Outdoor Unit Dimensions (W x H x D) | 660 x 530 x 240 mm |
| Outdoor Unit Noise Level | 48 dB(A) |
Explains DANGER, WARNING, and CAUTION symbols and their severity levels for safe operation.
Highlights risks of electric shock from wet hands, water contact, and improper wiring.
Covers safety procedures for installation, repair, and appliance handling to prevent hazards.
Provides warnings against improper operation, modifications, and placement near hazards.
Addresses risks associated with refrigerant leaks, unit cleaning, power cables, and direct air exposure.
Details safe usage in different environments, ventilation needs, and checks for unit stability.
Outlines safety measures for maintenance, unit checks, and responses to lightning or system errors.
Provides guidelines for safe insertion, handling, and disposal of remote control batteries.
Identifies and explains the various indicator lights on the indoor unit display panel.
Covers filter preparation, battery loading, clock setup, and remote control reset procedures.
Explains how to adjust vertical air flow direction and notes for manual horizontal adjustment.
Details the various buttons and their functions on the wireless remote control unit.
Describes the fully automated operation mode tailored to user preferences.
Guides on setting the unit to automatically select cooling or heating based on conditions.
Instructions for selecting and setting desired temperatures for cooling or heating modes.
Explains how to use the Dry mode for dehumidification with moderate cooling.
Details how to quickly adjust room temperature and airflow for faster cooling or heating.
Instructions for operating the unit to save energy by adjusting temperature over time.
How to start or stop the unit using the indoor unit's reset button when the remote is lost.
Guides on setting daily ON and OFF timers for automated operation start and stop.
Covers setting personalized operations and using the quiet mode for low fan speed.
Explains comfort sleep mode and automatic restart function after power failure.
Details filter reset, cleaning the indoor unit and remote control, and self-cleaning operation.
Lists common operational problems and their potential causes for self-diagnosis.
Instructions for setting up multiple remote controls for two indoor units installed nearby.
To Next Page