To Next PageTo Next Page
Need help?Do you have a question about the Toshiba RAV-SM563AT-E and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 5.6 kW |
| Heating Capacity | 6.3 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Weight (Outdoor Unit) | 38 kg |
| Coefficient of Performance (COP) | 3.61 |
| Outdoor Unit Weight | 38 kg |
| Indoor Unit Weight | 22 kg |
Lists accessories that are sold separately, such as remote controllers and optional parts.
Covers warnings for installation, operation, movement, and repair, including grounding and high voltage.
Emphasizes proper installation, drain hose, exclusive power supply, and avoiding flammable gas.
Highlights daily operation tips, avoiding special uses, ventilation, and handling wet fingers or long periods of non-use.
Diagram and description of indoor unit parts like buttons, air filters, and louvers.
Diagram and description of outdoor unit parts such as air inlet, outlet, and pipes.
Explanation of the display section and its various indicators like SET DATA, Timer, Filter, etc.
Description of the operation section buttons and their functions.
How to select operation modes (HEAT, DRY, COOL, FAN) and adjust air volume (AUTO, HIGH, MED, LOW).
Instructions for setting the desired temperature and using the timer functions.
Explanation of the operation lamp, UNIT button, and FILTER RESET function.
Steps for initial setup, turning on power, and initial remote controller interaction.
Guide to starting the unit, selecting modes, adjusting air volume, and setting temperature.
Procedure for turning off the air conditioner using the ON/OFF button.
How to set the air conditioner to automatically select cooling, heating, or fan operation.
Details on temperature settings, fan speed, and specific conditions like preheating and defrosting in auto mode.
Notes on post-stop restart delays and how to stop the automatic operation.
Instructions for adjusting the up/down wind direction for heating and cooling/dry modes.
How to start, stop, and control the automatic swinging motion of the air louvers.
Explanation of OFF timer, Repeat OFF timer, and ON timer functionalities.
Steps for setting the desired time and cancelling an active timer operation.
Recommendations for maintaining temperature, cleaning filters, and using window curtains.
Guidance on adjusting airflow to ensure uniform distribution of air in the room.
Instructions and precautions for cleaning the remote controller and the indoor unit.
Procedure for preparing the air conditioner for storage, including drying and power disconnection.
Essential checks before operating, such as filter presence, unobstructed air paths, and power supply.
Details on the 3-minute protection, power failure recovery, and handling nearby electronic interference.
Explanation of preheating, warm air control, defrosting, and heating capacity.
Specifies the recommended temperature and humidity ranges for cooling, dry, and heating operations.
Lists prohibited installation locations to avoid noise interference, malfunction, or hazards.
Advice on installing the unit on a stable foundation to minimize operational noise and vibrations.
Guidance on what to do if operation lamps flash, switches fail, fuses blow, or foreign objects are present.
Steps to verify power supply, circuit breakers, fuses, and electrical current before service.
Troubleshooting common issues like poor cooling/heating, noise, odors, and airflow anomalies.
Clarification of phenomena like airflow changes and white mist as non-failure events.
