–4–
EN
Installation Manual
Installation
Requirements to install the remote controller
◆ Installation place
• Install the remote controller at a height of 1 to 1.5 m from the floor so that the average temperature in the room
can be detected.
• Do not install the remote controller in a place exposed to direct sunlight or direct outside air, such as the side of
a window.
• Do not install the remote controller in a place behind something or to the rear side of an object, where air flow is
not sufficient.
• Do not install the remote controller in a freezing box or refrigerator, as the remote controller is not waterproof.
• Install the remote controller vertically to the wall.
◆ Installation dimension
Room temperature
sensor
120 mm
20 mm
120 mm
4-Ø4.2×8 slotted hole
24 mm
22 mm
42 mm
42 mm
To Next Page
Loading...
