–30–
Owner’s Manual
EN
Energy saving schedule
• The time of the schedule setting for the Energy saving operation can be set within the range from 0:00 to 23:50 at 10
minute intervals.
• The save ratio of the schedule setting for the Energy saving operation can be selected only from “random (*1)”, “50%”,
or “0%”.
• Adjust the clock before setting the Energy saving schedule. (page 34)
• The lower save ratio is applied when the different save ratios are set at the same hours on the schedule.
*1: Random is the value set at “Energy saving ratio”.
1 Push the [ ∧] / [ ∨] button to select
“3. Energy saving schedule” on the “Energy
saving operation” screen, then push the
“ Set” [
F2] button.
The “Clock” setting screen appears if the clock
has not been adjusted. (page 34)
2 Push the [ ∧] / [ ∨] button to set the
time and energy saving ratio.
Push the “ ←” [ F1] /
“
→” [ F2] button to set the
value.
3 Push the [ MENU] button.
The screen returns to the “Energy saving
operation” screen.
Energy saving operation
1.Energy saving operation
2.Energy saving ratio
3.Energy saving schedule
ON / OFF
Return Fix
Set
Energy saving schedule
Return Fix
1.
--
:
--
-
--
:
--
**%
2.
--
:
--
-
--
:
--
**%
3.
--
:
--
-
--
:
--
**%
4.
--
:
--
-
--
:
--
**%
Energy saving schedule
Return Fix
1.
08:00
-
12:00
80%
2.
12:00
-
13:00
50%
3.
13:00
-
17:00
80%
4.
19:00
-
08:00
50%