Do you have a question about the Toshiba RBC-TWP50E2 and is the answer not in the manual?
Brand | Toshiba |
---|---|
Model | RBC-TWP50E2 |
Category | Air Conditioner |
Language | English |
Details pipe length and height difference tolerances for different models.
Specifies required pipe materials, diameters, and wall thicknesses.
Explains bending, adjusting, and fixing branch pipes for horizontal installation.
Refers to outdoor unit instructions for complete information on air purging.
Provides formulas and data for calculating additional refrigerant based on pipe length.
Advises using specific leak detectors for HFC refrigerants like R32 and R410A.
Details connecting noise filter to indoor unit PC board for remote controller.
Explains wiring from outdoor unit to main unit and master to sub unit.
Details installing connection wires and jumper wires for remote control.
Illustrates wiring connections between indoor, outdoor units, and remote controller.
Lists specifications for wires, including type, diameter, and number of wires.
Provides information on initial operation, automatic addressing, and startup.
Shows a wiring diagram specific to the RAV-SM1603AT-E model.
Lists wiring specifications for the RAV-SM1603AT-E model.
Provides operational notes specific to the RAV-SM1603AT-E model.
Lists precautions for simultaneous twin systems to conform to EMC standards.
Details how to attach the supplied ferrite core to indoor/outdoor connecting wires.
Explains how to attach the supplied clamp filter to the outdoor fan motor lead wire.
Illustrates heat insulation for main piping using vinyl tape and foamed urethane.
Explains group control for up to 8 units using a single remote controller.
Details the automatic address setting process for units in a group control system.
Explains how to change indoor unit addresses using a wired remote controller.
Explains how to check unit numbers and activate fans in a group control.
Explains how to confirm indoor unit numbers and positions for a selected outdoor unit.