54
CONTROLS AND FEATURES
English
To select a file in the list of contents:
a
Press
B
or
b
to select a file or folder.
b
Press
OK
to move to the next layer, or press
RETURN
to return to the previous layer.
To close the Media Player:
a
Press
EXIT
.
To display the device information:
a
Press
QUICK
to open the
Quick Menu
in list mode or
Multi View mode.
b
Press
B
or
b
to select
Device Information
.
Setting DLNA CERTIFIED™ Server waking up:
You only need to complete the Media Server Setup if
you wish to use the “Wake-on-LAN” feature.
a
In the
APPLICATIONS
menu, highlight
Media
Player
, and then press
OK
.
b
Press
B
or
b
to highlight
Setup
, and press
OK
.
c
Press
B
or
b
to highlight
Media Server Setup
, and
press
OK
. A list of currently available DMSs will
appear.
d
Press
B
or
b
to select the desired device, and press
OK
. A check will appear in the box. To remove the
check, press
OK
again.
e
Press
c
to highlight
Done
, and then press
OK
to save.
NOTE:
• Up to 8 DMSes can be selected.
• Even if the device checked is powered off, it will be displayed
but grayed out in the
Select Device
window. When
OK
is
pressed on a highlighted grayed out item, a confirmation of
Wake-on-LAN is displayed. The TV tries to wake up the DMS
if
Yes
is pressed. The Server will start if it supports Wake-on-
LAN feature.
• When some DMSs are connected, it may take time until the
list is displayed. The list may be refreshed by the following
operation.
- The device selection window is closed once and it is
displayed again.
-The
RED
button is pressed.
There are three types of viewing modes.
Multi View
This view allows you to search for photos in a grid format.
The pictures are displayed using thumbnail data in each image
file.
The initial highlighted position will be on the top left thumbnail
in the Multi View.
a
Press
B
b
C
c
to move the highlight in one window.
If all of the photos will not fit in one screen, when
pressing
C
at the top left thumbnail, the screen will
move to the previous page. Conversely, when pressing
c
at the bottom right thumbnail, the screen will move
to the next page.
P
U
P
u
buttons can be used to page up/down the
photo list when there are more photos than will fit onto
one screen. When the
P
U
P
u
buttons are pressed, the
highlight shall be on the photo at the top left of
Previous/Next list.
b
When you select a folder, press
OK
to move to the next
layer. Press
RETURN
to move back to the previous
layer.
c
Press
OK
to view the selected photo in Single View
mode.
NOTE:
When the TV is used as a DMR, this feature is not
available.
Viewing photo files
Photo
/Folder Sort: Title
1/54
E05265464.jpg
10:00 Fri, 21 Feb 2010
1920x1080
Page BackSelectOK P RETURN
QUICK
Features
To Next Page
Loading...
