Satellite A200/Satellite Pro A200 9-5
Optional Devices
Removing a memory card
To remove a memory card, follow the steps below:
1. Click the Safely Remove Hardware icon on the Taskbar.
2. Select a device, then click the Stop button. A confirmation dialog may
appear, depending on how the device is registered with the system; if
so, confirm that you want to remove the device.
3. Gently press the memory card inside the socket to eject it.
4. Grasp the card and remove it.
Removing a memory card
Memory card care
1. Do not write to a memory card if the battery power is low. Low power
could affect writing accuracy.
2. Do not remove a memory card while read/write is in progress.
3. The memory card is designed so that it can be inserted only one way.
Do not try to force the card into the slot.
4. Do not leave a memory card partially inserted in the slot. Press the
memory card until you hear it click into place.
5. Do not twist or bend memory cards.
■ Make sure the memory card indicator is out before you remove the card
or turn off the computer's power. If you remove the card or turn off the
power while the computer is accessing the card you may lose data or
damage the card.
■ Do not remove the card while the computer is in Sleep or Hibernation
mode. The computer could become unstable or data in the memory card
could be lost.
■ Do not turn off or place the computer into either Sleep Mode or
Hibernation Mode while data is being transferred to or from the memory
card. The system may become unstable or data in the memory card may
be lost.
Set the write-protect switch to the lock position, if you do not want to record
data.
To Next Page
Loading...
