Toshiba Satellite A200 Series - Settings for Audio on Hdmi

Satellite A200/Satellite Pro A200 9-15
Optional Devices
Settings for audio on HDMI
To set the audio device to use the HDMI, follow the steps below.
1. Go to Start then select Control Panel.
2. Click Hardware and Sound then select Sound. If you are in control
panel classic view, select Sound directly.
3. In Sound window, select Digital Output Device (HDMI) then click Set
Default once.
Selecting Audio HDMI output
■ Be sure to use the FN + F5 HotKey to select the display device before
starting to play video. Do not change the display device while playing
video.
■ Do not change the display device under the following conditions.
■ While data is being read or written.
■ While communication is being carried out.
Please follow above steps to change back to speakers after you plug out
HDMI connector.