9-14 Satellite A200/Satellite Pro A200
Optional Devices
6. Click Desktop Area and Refresh Rate to select the one of below format
which is supported on this platform.
* Lists the actual Signal Formats supported by the HDMI monitor you are
using.
7. Click Apply button.
Connecting the HDMI out port
1. Plug one end of the HDMI out cable into the HDMI out port of the HDMI
device.
2. Plug one end of the HDMI out cable into the HDMI out port on your
computer.
Connecting the HDMI out port
Settings for display video on HDMI
To view video on the HDMI device, be sure to configure the following settings
otherwise you may find that nothing is displayed.
Country/Region Signal Format*
Any 1080i HDTV
Any 720p HDTV
Any 576p EDTV
Any 480p EDTV
Above operation is the way to select Desktop Area and Refresh Rate format
directly. The resolution also can be selected on Display Manager Tab.
HDMI out port
End user refer page 8-9 and Appendix B-5, for more detail, to out put HDMI
device.
To Next Page
Loading...
