Satellite A210/Satellite Pro A210 9-9
Optional Devices
To change the display settings, press Fn + F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn + F5 to switch to the
internal display. Refer to Chapter 6, The Keyboard, for details on using hot
keys to change the display setting.
Tel evi sio n
A television can be connected to the video out port on the computer.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video
out port.
3. Turn the television on.
4. Turn the computer on.
You can use the hotkeys Fn + F5 to change the display device. Refer to
Chapter 6, The Keyboard.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below, based on the configuration of your
computer:
To Next Page
Loading...
