Satellite A210/Satellite Pro A210 1-11
Satellite A210/Satellite Pro A210 Series Features
Low Battery
Automatic
Hibernation
When battery power is exhausted to the point that
computer operation cannot be continued, the
system automatically enters Hibernation Mode
and shuts itself down. You can specify the setting
in the Power Options.
Hibernation This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk. When you
turn on the power again, you can continue
working right where you left off. Refer to the
Turning off the power section in Chapter 3,
Getting Started, for details.
Sleep In Sleep Mode, power to the system remains on,
but the processor and all other devices are
effectively in 'sleep mode'. When the computer is
in Sleep Mode, the Power LED flashes amber. The
computer enters Sleep Mode regardless of the
Hibernate Mode setting. Refer to the Turning off
the power section in Chapter 3, Getting Started,
for details.
Fingerprint Adds an additional layer of security to your files
by requiring a valid fingerprint to access them.
■ Before entering Sleep mode, be sure to save your data.
■ Do not install or remove a memory module while the computer is in Sleep
mode. The computer or the module could be damaged.
■ Do not remove the battery pack while the computer is in Sleep mode.
Data in memory will be lost.
To Next Page
Loading...
