4.24 LCD cable/Sensor switch/Wireless LAN antenna 4 Replacement Procedures
Satellite A40 Maintenance Manual (960-458) 4-63
3. Remove the hinge cap (at the LCD cable side).
4. Pull out the LCD cable from the hole.
5. Remove the sensor switch while unhooking the latches.
Hinge cap
Sensor switch
Figure 4-40 Removing the hinge cap (on the LCD cable side) and sensor switch
6. Peel off the acetate tape on the back and take out the sensor switch cable from the guide
and hole.
To Next Page
Loading...
