4.26 Fluorescent lamp 4 Replacement Procedure
Satellite A40 Maintenance Manual (960-458) 4-81
Removing the screws
1. Spread out the insulation sheet without detaching it from the side of the bezel, as shown in
Figure 4-46.
2. In the order (1) and (2) shown in Figure 4-64, remove the screws from the left- and right-
hand sides of the module.
CAUTION: To unfasten the screws, use an insert bit of point size 0 for Philips
screwdrivers.
1
1
1
1
2
2
2
2
F9402
? ? ? ? ?
>PC-GF13<
BL S/ N ? ? ?
F L? ? ?? ?
CAU T I ON? ? ?
Label (cautions for disposal of FL tubes)
Figure 4-64 Replacing 14 Inch TMD fluorescent lamp (2)
To Next Page
Loading...
