4 Replacement Procedures 4.26 Fluorescent lamp
4-124 Satellite A40 Maintenance Manual (960-458)
Assembling the 15.0 Inch XGA Sharp Fluorescent Lamp
To assemble the 15.0 Inch Sharp XGA fluorescent lamp, follow the steps below and refer to figures
4-108 to 4-120.
1. Stick the four double-sided tapes (N, O, P, Q) on the P-chassis.
(Q)
(N)
Standard for edge of P-chassis
Do not make the P-chassis over this line.
0 to 1 mm
Figure 4-108 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (11)
To Next Page
Loading...
