4.26 Fluorescent lamp 4 Replacement Procedures
Satellite A40 Maintenance Manual (960-458) 4-133
10. Stick the protection cover G (B), protection cover S (A), fixing tape (C) and fixing tape for
lead wire (D).
Fit the cover according to the outline of the screw.
Stick the tape according to the outline of the
LCD module. Make sure the tape does not
appear on the side of the module.
Do not make the tape over the top of the module.
0 to 1 mm
The tape MUST NOT appear on the display.
0 to 0.5 mm
(C)
(D)
(B)
(A)
Figure 4-120 Replacing 15.0 Inch Sharp fluorescent lamp (XGA) (23)
To Next Page
Loading...
