4.26 Fluorescent lamp 4 Replacement Procedures
Satellite A40 Maintenance Manual (960-458) 4-149
8. Install the bezel (E) on the lamp cover. Attach four latches on the lamp cover and two
latches on the P-chassis.
(E) Bezel
(2) Lean the bezel on the lamp cover
without interference with the TCP.
(1) Hitch the hook of the bezel
on the rib of the P-chassis.
< Side view >
Hook
(Lamp cover side)
Figure 4-148 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (20)
Make sure of mating of the bezel and the rib of the P-chassis.
Make sure of mating of the bezel and the latch of
Make sure of mating of the bezel
and the latch of the P-chassis.
Figure 4-149 Replacing 15.0 Inch Sharp fluorescent lamp (SXGA+) (21)
To Next Page
Loading...
