2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting
2-14 Satellite A40 Maintenance Manual (960-458)
Check 2 In the case of error code 10h or 12h:
q Make sure the AC adaptor cord and AC power cord are firmly plugged into
the DC IN 15 V socket and wall outlet. If the cables are connected correctly,
go to the following step:
q Connect a new AC adaptor and/or AC power cord, if necessary. If the error
still exists, go to Procedure 5.
Check 3 In the case of error code 2Xh:
q Make sure the battery pack is correctly installed in the computer. If the battery
pack is correctly installed, go to the following step:
q Replace the battery pack with a new one. If the error still exists, go to
Procedure 5.
Check 4 For any other error, go to Procedure 5.
To Next Page
Loading...
