User’s Manual 3-27
Hardware, Utilities and Options
6. Slide your fingernail or a thin object under the cover and lift it off.
Figure 3-6 Removing the memory module cover
7. Align the notch of the memory module with that of the memory slot and
gently insert the module into the slot at about a 45 degree angle before
holding it down until the latches on either side snap into place.
Figure 3-7 Seating the memory module
1. Memory module cover
2. Screw
1. Notch
3. Slot B
2. Slot A
1
2
1
2
3
To Next Page
Loading...
