User’s Manual 3-30
Hardware, Utilities and Options
Figure 3-9 Removing the memory module
9. Seat the memory module cover in place and secure it with one screw.
10. Install the battery pack - refer to Replacing the battery pack section in
Chapter 6, Power and Power-Up Modes, if required.
11. Turn your computer over.
External monitor
An external analog monitor can be connected to the external monitor port
on the computer. To connect a monitor, follow the steps as detailed below:
Connecting the monitor cable
1. Turn the computer's power off.
1. Latches
1
Take care to ensure that the memory module cover is firmly closed.
To Next Page
Loading...
Need help?
General