User’s Manual 7-1
Satellite A80
Chapter 7
HW Setup
This chapter explains how to use TOSHIBA HW Setup program to configure
your computer. TOSHIBA HW Setup lets you configure settings for General,
Display, Boot Priority, Keyboard, CPU, LAN, and USB.
Accessing HW Setup
To run HW Setup, click Start, click Control Panel, click Printers and Other
Hardware and select TOSHIBA HW Setup.
HW Setup Window
Th HW Setup window contains the following tabs: General, Display, Boot
Priority, Keyboard, CPU, LAN, Device Config, Parallel/Printer and USB.
There are also these three buttons: OK, Cancel and Apply.
General
This window displays the BIOS version and contains two buttons: Default
and About.
Some models are not equipped with Parallel/Printer tab and/or CPU tab.
OK Accepts your changes and closes the HW Setup
window.
Cancel Closes the window without accepting your
changes.
Apply Accepts all your changes without closing the HW
Setup window.
Default Return all HW Setup values to the factory settings.
About Display the HW Setup version.
To Next Page
Loading...
