Toshiba Satellite L510 Series - Batch Parameters Configuration

3.3Option 3DiagnosticPrograms
 

 
    
 

 
17
Configurebatchparametersandallthetestitem’sparameters.
• LoadBatchParameters
Uploadallthetestitemsandtheparameterstothe*.inifile.
• SaveBatchParameters
Savealltheparametersandthetestitemsthatareconfiguredintheeditortoa
specifiedfile.
• LogParameters
ConfigureLOGparameters.
• SpecifyLOGViewer
SpecifytheviewerfortheLOGfile.
• DisplayErrorLogFile
LoadtheLOGfileviewerspecifiedintheSpecifyLogViewertoviewtheLOG
file.
• DOSShell
EntertheDOSShellandexecutetheDOSprograms.Youcanalsoexittothe
ServiceDiagnosticsEditorbythecommandofEXIT.
• ExittoDOS
ExittheServiceDiagnosticsEditorandbacktoDOS.
3.3.2 BatchParametersConfiguration
ThebatchparametersconfigurationscreencanbeaccessedthroughService
Diagnostics/OPTIONS->EDITBATCHPARAMETERS->BATCH
PARAMETERS: