4.22 LCD Bezel 4 Replacement Procedures
Satellite L670/L675/Pro L670 Maintenance Manual [CONFIDENTIAL]
Install the LCD bezel assembly according to the following procedures.
NOTE:
Take care not to pinch the antenna cables. Make sure the routing positions of the antennas are
correct and do not block any components, such as screw holes.
1. Place the LCD bezel assembly on the LCD cover assembly. Make sure the hinge caps fit
over the LCD hinges and the tabs on the back of the LCD bezel align with the slots in the
LCD cover assembly.
2. Press down on the LCD bezel, starting from the bottom edge and toward the sides and top
edge. Make sure the bezel clicks into place.
3. Secure the LCD bezel to the LCD cover assembly with six M2.5x6 screws.
4. Adhere the six screw rubbers to the screws.
To Next Page
Loading...
