4.25 Antennas for WLAN 4 Replacement Procedures
4.25 Antennas for WLAN
Removing the Antennas for WLAN
Remove the antennas for WLAN according to the following procedures and Figure 4.47.
1. Pull the antennas out from the routing channel on the LCD cover assembly.
2. Carefully peel the antennas from the LCD cover assembly.
Figure 4.47 Removing the antennas from the LCD cover assembly
Installing the Antennas for WLAN
NOTE:
Take care not to pinch the antenna cables. Make sure the routing positions of the antennas are
correct and do not block any components, such as screw holes.
Satellite L670/L675/Pro L670 Maintenance Manual [CONFIDENTIAL]
To Next Page
Loading...
