User’s Manual4-32
Operating Basics
How to learn more about Corel DVD MovieFactory for TOSHIBA
Please refer to the Help and Manual les for additional Corel DVD MovieFactory
for TOSHIBA information.
Important information for use
Note the following limitations when you write Video DVD:
1. Editing digital video
nLog in with Administrator rights to use DVD MovieFactory.
nMake sure that your computer is running on AC power when using DVD
MovieFactory.
nOperate the computer at Full Power. Do not use power-saving features.
nWhile you are editing DVD, you can display preview. However, if another
application is running the preview might not display properly.
nDVD MovieFactory cannot edit or play copy protected content.
nDo not enter sleep or hibernation mode while using DVD MovieFactory.
nDo not operate DVD MovieFactory immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
nWhen recording to a DV-Camcorder, to ensure you capture all of your
data, let the camcorder record for a few seconds before you begin
recording your actual data.
nCD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD
functions are not supported in this version.
nWhile recording video to DVD, please close all other programs.
nDo not run software like a screen saver because it can put a heavy load
on the CPU.
nDo not support mp3 decode and encode.
2. Before recording the video to DVD
n When you record DVD disc, please use only discs recommended by the
Drive manufacturer.
nDo not set the working drive to a slow device like a USB1.1 hard disk
drive or it will fail to write DVD.