User’s Manual D-1
Appendix D
AC Power Cord and Connectors
The power cord’s AC input plug must be compatible with the various international
AC power outlets and the cord must meet the standards for the country/region in
which it is used. All cords must meet the following specications:
Length: Minimum 1.7 meters
Wire size: Minimum 0.75 mm
2
Current rating: Minimum 2.5 amperes
Voltage rating: 125 or 250 VAC (depending on country/region’s
power standards)
Certication agencies
U.S. and Canada: UL listed and CSA certied
No. 18 AWG, Type SVT or SPT-2 two conductor
Australia: AS
Japan: DENANHO
Austria: OVE Italy: IMQ
Belgium: CEBEC The Netherlands: KEMA
Denmark: DEMKO Norway: NEMKO
Finland: SETI Sweden: SEMKO
France: UTE Switzerland: SEV
Germany: VDE United Kingdom: BSI
Europe:
To Next Page
Loading...
