User’s Manual 3-5
Getting Started
Turning on the power
This section describes how to turn on the power.
After you turn on the power for the rst time, do not turn it off until you have set
up the operating system. Refer to the section Windows
®
7 setup.
Press and hold the computer’s power button for two or three seconds.
Windows
®
7 setup
When you rst turn on the power, the computer’s initial screen is the Windows
®
7
Startup Screen Logo.
Follow the on-screen directions.
Be sure to read the Windows End User License Agreement display
carefully.
Turning on the power
To Next Page
Loading...
