User’s Manual 4-49
Operating Basics
nOperate the touchscreen with your finger.
nDo not apply too much pressure to the touchscreen.
nDo not touch the touchscreen with a wet finger or any wet objects. Keep
sensor surface dry and free of water vapor.
nDo not touch the sensor with a soiled finger.
nDo not place heavy objects on the machine.
nDo not use long fingernails and rings or other metal to touch the screen.
nThe touchscreen contains glass and some electronic parts which must be
handled with utmost care. Dropping and strong impact applied may break this
product.
nWhen the touchscreen becomes dirty clean it with glass wiping cloth or dry
cloth while the computer is turned off. Do not use volatile liquids such as
alcohol, thinner or petroleum benzine to clean the screen.
nIn order to avoid damages to the display screen, please refrain from doing
anything other than the specified operation methods. Failure to do so could
cause a malfunction or characteristic deterioration.
Touchscreen settings
nTo configure your touchscreen’s settings click Start Control Panel
Hardware and Sound Tablet PC Settings Setup (In the Configure
box)
nTo calibrate your touchscreen’s settings click Start Control Panel
Hardware and Sound Tablet PC Settings Calibrate
nTo change touch input settings click Start Control Panel Hardware
and Sound Pen and Touch Touch (tab)
nTo change settings for left-handed or right-handed users click Start
Control Panel Hardware and Sound Tablet PC Settings Other
(Tab)
nTo change or create flick assignments click Start Control Panel
Hardware and Sound Pen and Touch Flicks (tab)