Toshiba Satellite - Figure 4.27 Removing the Speakers; Removing the Speakers; Speakers and Speaker Cushions

4 Replacement Procedures
4.13 Speakers and Speaker Cushions
Removing the Speakers
Remove the speakers according to the following procedures and Figure 4.27.
1. Pull the FCC cable covering the speaker cables from the slot as indicated in Figure 4.27.
2. Pull the speaker cables from the routing channel.
3. Remove the four M2.5x6.5 screws securing the speakers to the logic upper assembly and
remove the speakers.
M2.5x6.5*2
M2.5x6.5*2
Figure 4.27 Removing the speakers
Satellite A660/ProA660 Series Maintenance Manual 4-37