4 Replacement Procedures
Satellite A660/ProA660 Series Maintenance Manual 4-58
Installing the LCD Bezel
Install the LCD bezel according to the following procedures.
1. Seat the LCD bezel in the correct position on the display assembly.
2. Press the LCD bezel assembly down onto the display assembly until it snaps into place.
Work your way around the face of the LCD bezel ensuring that it is securely snapped into
place at all points.
3. Secure the LCD bezel to the display assembly with the four M2.5x5 screws and cover the
screws with the rubber seals.
CAUTION: Take care not to pinch the WLAN and 3G (optional) antennas when installing the
LCD bezel. Ensure the antenna cables are properly routed as indicated in the section WLAN
Antennas.
To Next Page
Loading...
