Toshiba Satellite - Figure 4.28 Removing the Speaker Cushions; Installing the Speaker Cushions; Installing the Speakers; Removing the Speaker Cushions

4 Replacement Procedures
Removing the Speaker Cushions
Remove the speaker cushions according to the following procedures and Figure 4.28.
1. Remove the four speaker cushions from the speakers.
Figure 4.28 Removing the speaker cushions
Installing the Speaker Cushions
Install the speaker cushions according to the following procedures.
1. Pinch the speaker cushions and insert them into the speakers.
Installing the Speakers
Install the speakers according to the following procedures.
1. Seat the speakers in the correct position on the logic upper assembly.
2. Secure the four M2.5x6.5 screws as shown in Figure 4.27.
3. Route the speaker cables in the routing channels on the logic upper assembly.
Satellite A660/ProA660 Series Maintenance Manual 4-38