Toshiba SD-2715 - Section 4 Mechanism;Parts List

• Top View..................................................4-1
• Top View(without Tray Disc) .................4-1
• Bottom View ...........................................4-1
1. Holder Assembly Clamp..................4-2
1-1. Plate Clamp ......................................4-2
1-2. Magnet Clamp ..................................4-2
1-3. Upper Clamp.....................................4-2
1-4. Holder Clamp....................................4-2
2. Base Assembly Tray ........................4-2
2-1. Tray Disc(Fig.4-2) .............................4-2
2-2. Roller Base Tray...............................4-2
2-3. PCB Assembly Tray..........................4-2
2-4. Motor Assembly Tray........................4-2
2-5. Gear Tray..........................................4-2
2-6. Gear Wheel Tray ..............................4-2
2-7. Base Tray..........................................4-2
3. Frame Assembly Up/Down..............4-3
3-1. PCB Assembly Junction ...................4-3
3-2. Base Assembly Sled Damper...........4-3
3-2-1. Gear Assembly Feed ....................4-3
3-2-2. Gear Assembly Middle..................4-3
3-2-3. Gear Assembly Rack ...................4-3
3-3. Rubber Damper ................................4-3
3-4. Frame Up/Down................................4-3
4. Base Assembly Main........................4-4
4-1. PCB Assembly Main Mode...............4-4
4-2. Gear Slider........................................4-4
4-3. Gear Exchange.................................4-4
4-4. Gear Main.........................................4-4
4-5. Gear Up/Down .................................4-4
4-6. Gear Wheel Main..............................4-4
4-7. Gear Loading....................................4-4
4-8. Motor Assembly Main .......................4-4
4-9. Base Main.........................................4-4
1. Tools and Fixtures for SVC .............4-5
2. Install Process..................................4-5
3. Adjustment Process.........................4-6
1. Deck Mechanism Exploded View....4-7
CONTENTS
SECTION 4 MECHANISM/PARTS LIST
DECK MECHANISM PARTS
LOCATIONS
EXPLODED VIEW
DECK MECHANISM ADJUSTMENT
DECK MECHANISM
DISASSEMBLY
PARTS LIST
1.Parts List..........................................4-9