Toshiba SD-2715 - Base Assembly Main; PCB Assembly Main Mode; Gear Slider; Gear Exchange

4-4
DECK MECHANISM DISASSEMBLY
(S10)
(S12)
(S11)
Fig.(B)
(S15)
(S15)
(S14)
(S9)
(S9)
(S9)
(C8)
(C9)
(L4)
(S13)
GEAR SLIDER
GEAR MAIN
GEAR EXCHANGE
GEAR LOADING
GEAR WHEEL MAIN
MOTOR ASSEMBLY MAIN
MOTOR ASSEMBLY MAIN
MODE SWITCH
PCB ASSEMBLY MAIN MODE
BASE MAIN
GEAR UP/DOWN
Fig.(A)
Fig.(C)
Fig. 4-4
4. Base Assembly Main(Fig. 4-4)
• Put the Base Assembly Main face down(Bottom Side).
4-1. PCB Assembly Main Mode
1)Unconnect the Connectors (C8), (C9).
2)Release three Screws(S9).
• When reassembling, align the Mode Switch position as
Fig.(A).
• Put the Base Assembly Main on original position(Top Side)
4-2. Gear Slider
1) Release Screw(S10).
4-3. Gear Exchange
1) Release Screw(S11).
4-4. Gear Main
1) Release Screw(S12).
• When reassembling, align the (A) position of the Gear Main
to the (B) position of Mode Switch as Fig.(B)
4-5. Gear Up/Down
1) Release Screw(S13).
• Reassembling, turn the Gear Up/Down in direction of arrow
as Fig.(C).
4-6. Gear Wheel Main
1) Release Screw(S14).
4-7. Gear Loading
4-8. Motor Assembly Main
1) Release 2 Screws(S15).
2) Unlock the Locking Tab(L4).
4-9. Base Main
Note
Note
Note
Note