52
Advanced playback (DVD)
Subtitles/Karaoke playback
Turning the subtitles on and off
Press SUB TITLE during playback until “Off”
appears.
When playing back a disc recorded with subtitles, you can turn the subtitles on or off.
SUB TITLE
DVD
Note:
Depending on the DVD, you may not be able to turn
the subtitles on even if they are recorded on it.
Depending on the DVD, you may not be able to turn
the subtitles off.
Off
Changing the subtitle language
Press SUBTITLE repeatedly during playback until
your desired language appears.
The on-screen display will disappear after a few
seconds.
You can select the language when playing back a disc recorded with multi-lingual subtitles.
DVD
Notes:
• Changing subtitle language is cancelled when you open
the disc tray or turn the power off.
• Depending on the DVD, you may not be able to change
the subtitles even if multilingual subtitles are recorded
on it. While playing the DVD, the subtitle may change
when: -you open or close the disc tray -you change the
title.
• In some cases, the subtitle language is not changed to
the selected one immediately.
1
1/32 Eng
2
Karaoke playback
During DVD KARAOKE disc playback, press
AUDIO.
Press or to select “On”.
Off : The primary vocal is not output.
On:The primary vocal is output
when it is recorded on the disc.
You can turn the vocal on or off recorded on the DVD KARAOKE.
DVD
Notes:
• The vocal output feature is used during playback of
Dolby Digital (multi-channel) recorded DVD KARAOKE
discs. This feature allows you to turn off vocal audio
tracks, or restore them for background accompaniment.
• When playing KARAOKE, connect appropriate audio
equipment such as an amplifier to the DVD/VCR.
1
2
2/8 Fra Dolby Digital
On
/
AUDIO
53
Advanced playback (DVD)
Setting the aspect ratio of TV screen
1
Press SET UP in the stop mode or No Disc.
Press
or to select “Picture”.
Press or ENTER, then press or to select
“Tv Screen”.
Press or ENTER.
Press
or to select your desired screen
type, then press ENTER.
ENTER
▲ / ▼ /
/
Setting the aspect ratio of TV screen
You can select the aspect ratio for your TV.
The following pages describe the setup/operation in DVD mode.
DVD
RETURN
SET UP
/Enter/Setup/Return
Language Picture Parental OtherSound
2
Tv Screen
Display
On
4:3
/Enter/Setup/Return
Language Picture Parental OtherSound
3
Tv Screen
Display
On
4:3
4:3
16:9
4:3
/Enter/Setup/Return
Language Picture Parental OtherSound
Function setup (DVD)
Function setup (DVD)
You have the following screen sizes to choose from:
4:3 Normal TV
Select this mode when connecting to a conventional TV.
When playing back a wide screen-DVD disc, it displays
the wide picture with black bands at the top and bottom of
screen.
4:3
PAN SCAN
It displays the wide picture on the whole screen with left
and right edges automatically cut off.
16:9
WIDE SCREEN
Select this mode when connecting to a wide-screen TV.
A wide screen picture is displayed full size.
To make SETUP screen disappear, press SET UP
or RETURN while the SETUP screen is being
displayed.
4
Note:
If the DVD disc is not formatted in the pan & scan style, it
displays 4:3 style.
54
00:34:56 01:12:33
00:34:56 01:12:33
1/9
Title 1/99
1/8
1/32
Chapter 1/999
Eng DolbyDigital
Eng
Each Press of DISPLAY, the status display of the disc
will appear on the screen and change as follows.
DVD
To make status display disappear, press DISPLAY again.
Setting on screen display
1
Press SET UP in the stop mode or No Disc.
Press
or to select “Picture”.
Press or ENTER, then press or to select
“Display”.
Setting on screen display/Status display of disc
DVD
On screen display can be switched on or off when you press the buttons.
Function setup (DVD)
2
Tv Screen
Display
On
4:3
/Enter/Setup/Return
Language Picture Parental OtherSound
/Enter/Setup/Return
Language Picture Parental OtherSound
Press / or ENTER to select “On” or “Off”.
ON: On screen displays appear
when you press the buttons
(factory setting).
OFF: On screen displays do not
appear when you press any
buttons.
To make SETUP screen disappear, press SET UP or
RETURN while the SETUP screen is being displayed.
3
4
Tv Screen
Display
Off
4:3
/Enter/Setup/Return
Language Picture Parental OtherSound
Status display of disc
DVD
VCD
CD
When you playback the CD disc, the status display will
appear on the screen and continue displaying.
ENTER
▲ / ▼ /
/
RETURN
SET UP
DISPLAY
AUDIO CD
VIDEO CD
34:56 71:33
Track 11/99
00:12 04:32
Track 1/3
PBC
00:12 04:32
55
Function setup (DVD)
Dynamic Range Control
Press SET UP in the stop mode.
Press
or to select “Sound”.
Press or ENTER to select “DRC”.
Press or ENTER, then press or to select
desired setting.
Max: Full dynamic range is
increased.
Std: Full dynamic range is
maintained.
Min: Dynamic range is reduced.
1
To make SETUP screen disappear, press SET UP
or RETURN while the SETUP screen is being
displayed.
4
Dynamic Range Control
DRC (Dynamic Range Control) enables you to control the dynamic range
so as to achieve a suitable sound for your equipment.
ENTER
▲ / ▼ /
/
RETURN
SET UP
DVD
/Enter/Setup/Return
Language Picture Parental OtherSound
2
DRC
Std
/Enter/Setup/Return
Language Picture Parental OtherSound
3
DRC
Max
Std
Min
/Enter/Setup/Return
Language Picture Parental OtherSound
Std
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
To Next Page
Loading...
