Toshiba SD-V280UA - Page 31

DISASSEMBLY INSTRUCTIONS
B1-2
1-5: POWER PCB (Refer to Fig. 1-5)
1.
2.
3.
Remove the 3 screws 1.
Disconnect the following connector: (CP1701).
Remove the Power PCB in the direction of arrow.
Fig. 1-5
NOTE
When the installation of the Deck CD, remove all the
soldering on the short circuit position after the connection of
Pick Up PCB and DVD PCB connector.
1
1
Power PCB
Bottom Plate
1
1
2
2
2
2
2
VCR PCB
2
2
2
Bottom Plate
1-6: VCR DECK (Refer to Fig. 1-6)
1.
2.
3.
4.
Unlock the 2 supports 1 and remove the Top Holder.
Remove the 3 screws 2.
Disconnect the following connectors: (CP101, CP102,
CP103 and CP3001).
Remove the AC Head Cover and VCR Deck in the
direction of arrow.
Fig. 1-6
1-7: VCR PCB (Refer to Fig. 1-7)
1.
2.
3.
Remove the screw 1.
Remove the 8 screws 2.
Remove the VCR PCB in the direction of arrow.
Top Holder
2
2
2
VCR Deck
AC Head Cover
1
1
Fig. 1-7