Toshiba SD-V392SU2 - One-Touch Timer Recording (OTR)

36
Recording (VCR)
One-touch Timer Recording (OTR)
The One-touch Timer Recording feature provides a simple and
convenient way to make a timed recording.
One-touch Timer Recording (OTR)
Press
once
twice
3 times
4 times
5 times
NORMAL REC
0:30
1:00
1:30
2:00
3:00
4:00
5:00
6:00
NORMAL REC
Recording time
Press
6 times
7 times
8 times
9 times
10 times
Recording time
Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
1
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and “SP” or “SLP”
will appear on the screen for about 4
seconds.
2
Set “TV” or “CABLE” option to the
appropriate position
27
.
3
00 : 00 : 00 SP
CH 110
CH 110
INDEX
OTR 0 : 30
TV - VHF/UHF channels
CABLE - Cable TV channels
Press Number button or CH +/– to select the
channel to be recorded.
4
Press REC/OTR . Recording begins. Press the
button again to stop recording after 30 minutes.
Each additional press of
REC/OTR will increase
recording time as shown in the chart below, up
to a maximum of 6 hours.
The OTR and recording time will
appear on the screen for about 4
seconds. And, “
” will appear on
the display.
5
To cancel OTR
Press STOP or turn off the power.
“ ” will appear on screen for about 4 seconds.
Note:
If you wish to watch the DVD playback during OTR or standard
recording, press VCR DVD selector to change to DVD mode and
perform the DVD playback
43
.
4
4
2
5
VCR DVD
STOP
0
8
79
654
321
SP/SLP
PLAY MODE
SET
+
SET
–
CH
–
CH
+
ENTER
REC/OTR
STOP
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
Example: One-touch Timer Recording for 30 minutes.
J2D81001A (E)p32-37.p65 28/5/04, 1:53 PM36