To Next PageTo Next PageWhat to do if Toshiba SD-V394 DVD VCR Combo has no picture?
If your Toshiba DVD VCR Combo shows no picture, verify that the antenna connection is correct and the cable is securely connected. Ensure the video input selector on your TV is set to VIDEO (or equivalent) and that the channel is set to the external mode. The video channel should be in the correct position, either channel 3 or 4.
General| Brand | Toshiba |
|---|---|
| Model | SD-V394 |
| Category | DVD VCR Combo |
| Language | English |
Identifies controls on the front panel of the unit.
Identifies connections and controls on the rear panel.
Instructions for connecting an antenna to the DVD/VCR.
How to connect the DVD/VCR unit to a television set.
Steps for connecting cable TV services to the DVD/VCR.
Standard method for connecting the DVD/VCR to a TV.
How to connect to audio systems and TVs with advanced video inputs.
How to connect to an amplifier with Dolby Digital.
How to connect to an amplifier with Pro Logic.
How to connect to an amplifier with DTS decoder.
Steps to set the correct video channel for VCR playback.
How to select the on-screen display language.
Instructions for setting the unit's clock using AUTO CLOCK.
How to set daylight saving time automatically or manually.
How to select between TV and Cable modes.
Process for automatically scanning and memorizing channels.
Instructions for inserting and removing VHS tapes.
Steps to record a TV program.
How to watch TV while recording a program.
How to record and play back stereo VHS broadcasts.
How to switch to a second audio program.
How to copy discs to VHS tape.
Basic steps for playing a disc on the DVD player.
How to zoom in on the DVD playback image.
Information on playing protected DivX® Video On Demand content.
Steps to access and change DVD player settings.
