Toshiba STRATA CTX DKT3000 User Manual

Advanced Operation
Call Forward
30 Strata CTX DKT3000/2000-Series Telephone 05/02
➤ To use the Call Forward button sequence
➤ Follow the instructions in the following table, shown under “Button Sequence.”
Some features require additional input, such as:
• Destination – If the destination is an outside number, press
 after entering the
destination. The CTX accepts destination numbers of up to 32 digits.
• Timer – This is a two digit entry representing how long (eight to 160 seconds)
your telephone should ring before forwarding the call. If you enter one digit,
you must press
 after entering the single digit.
• Pass Code – A four-digit code established by system programming to prevent
unauthorized changes. The code applies to the station to be forwarded; not to
the station entering the code.
Note In the following table, (Tone) means that a confirmation tone will play at that
point in the sequence.
Table 2 Call Forward Procedure
Feature Button Sequence
Call Forward Any Call - Internal and Incoming Line Calls:
Forwards any call, whether an internal call or incoming line call.
All Calls Extension (Ext.) button +
 (Tone) + Destination No. (Tone)
Busy Ext. button +
 (Tone) + Dest. No. (Tone)
No Answer Ext. button +
 (Tone) + Dest. No. (Tone) + Timer + 
Busy No Answer Ext. button +  + Dest. No. + Timer + 
Cancel Ext. button +  (Tone)
Call Forward - Incoming Line Calls:
Forward incoming line calls only.
All Calls Ext. button +
 (Tone) + Dest. No. (Tone)
Busy Ext. button +
 (Tone) + Dest. No. (Tone)
No Answer Ext. button +
 + Dest. No. (Tone) + Timer (Tone) + 
Busy No Answer Ext. button +  + Dest. No. (Tone) + Timer (Tone) + 
Cancel Ext. button +  (Tone)

Toshiba STRATA CTX DKT3000 Specifications

General

Brand	Toshiba
Model	STRATA CTX DKT3000
Category	IP Phone
Language	English