Toshiba T3100e - System Setup Option Descriptions

File No. 960-010
3.24.3 SETUP Descriptions
This section explains the possible values for each SETUP option.
1. Hard Disk Type
As you change the values for this option using the right and left
arrow keys, the setup program displays one of the following
lines:
11 - Cy1= 615, H= 4, S/T= 17, Cap= 20MB
12 - Cyl= 980, H= 5, S/T= 17, Cap= 40MB
No Drive
Drive Table
Abbreviation
Cyl
H
SIT
Cap
Meaning
cylinder
head
sector/track
capacity
Select type 11 for the T3100e, or type 12 for the T3100e/40.
NOTE: Automatic Reset sets correct Hard Disk Type automatically,
but once the CMOS configuration error occurs the default value is
forced to type 11. In the case, you have to select type 12 for
the T3100e/40 by Manual Reset.
3-47