Toshiba T3100e - Page 90

File No. 960-010
4. Bad track CHECK Selection
(1) When Bad track CHECK is selected, the following message
will appear.
Drive number select (1:#1, 2:#2) ?
(2) Select a drive number. Type the drive number and press
Enter. The following message will appear.
Interleave number (3/1-3) ?
(3) Select an interleave number. (Usually select 3.) Type
the number and press Enter.
When the following message appears, and bad tracks of
the hard disk are checked.
[HOD TYPE]
[HOD TYPE]
[HOD TYPE]
CYLINDER
HEAD
SECTOR
=
XXX
=
X
=
XX
[[cylinder,head = XXX XX]]
(4) After checking the bad tracks of the hard disk, the
Format complete message will appear.
(5) Press the Enter to return to the HARD DISK FORMAT menu.
3-34